Linear winch type KTC 500

Product description

KTC 500 Linear winch 500 mTon capacity

Specially designed and manufactured for work on offshore platform this linear winch is a state of the art unit. The linear winch is designed in such a way that it can be divided in four (4) sections, with a maximum weight of 20 Mton, to meet the, often low, capacity of platform cranes. Each section of the linear winch can be lifted without a cradle, since each part is separate certified according to DNV 2.7-1.

Furthermore the unit can be used on live platforms and refineries, since all components of winch and power unit are explosion proof. Also the design is according to Norsok Z-015.

The above makes it possible to operate in Zone 2, IIA, T3. The machine proved its capabilities on 2 offshore platforms, "Troll A" and "Gullfaks C" both operated and owned by Statoil.


General description linear winch

The linear winch consists of two grippers mounted in a frame. The wire rope passes through each gripper. Each gripper is capable of holding the wire rope. The grippers move back and forth (extend and retract) through the actions of four hydraulic main cylinders. The grippers are independently controlled and their movement can be sequenced to either pull-in or payout the wire rope.

The holding action is developed by two wedges inside each gripper. If the wedges are contacting the wire rope when a load is applied to the wire rope, the wedges will clamp onto and hold the wire rope. When one gripper is pulling, the wire rope slips through the wedges of the other gripper.

Four hydraulic wedge cylinders control wedge movement. Extending the wedge cylinders closes the wedges. Retracting the wedge cylinders opens the wedges. Each pair of wedge cylinders is hydraulically connected in parallel to assure equal actuating forces.

Wire rope pull-in is accomplished manually or automatically by the control system. In both the manual and automatic mode, the #1 and #2 gripper wedges maintain in contact with the wire rope at all times.

KTC 500 LINEAR WINCH_sn65.24.006_Specification_AUG'20

General Arrangement Linear Winch KTC 500

KTC 500 DIESEL DRIVEN HPU_sn65.92.017_Specification_AUG'20

General Arrangement Hydraulic Power Unit KTC 500

Projects where this product is used

foto 07

KTC 500 > Norway

Continuous linear winch KTC 500 @ Troll A - project overview

KTC 500 > Troll A, Norway

HO 2013-006 pic 05

KTC 500 > Venezuela

Canopy deck

KTC 500 - Pipeline Pull in from Laybarge to Troll A Platform - Norway

XMFO5430 4-3s

KTC 500 > Ghana

Document downloaden

Please fill in your name and email address.

Email address:
  • Continuous linear winch KTC 500
  • Continuous linear winch KTC 500
  • Continuous linear winch KTC 500 with base frame


The winch can be equipped with a base frame with sheave.

Technical drawing
TD KTC 500
Performance data

The winch is ATEX certified.

Compliant with Hazardous Area: zone 2, II A, T3.

Dismountable in 4 parts below 20.000kg

Maximum Pulling Capacity  500 mTon @ 2,10 m/min

Maximum Speed  3,00 m/min @ 350 mTon

Bezemer Group Holland
Bunsenstraat 49
3316 GC Dordrecht, The Netherlands
t: +31 (0) 78 618 10 00
f: +31 (0) 78 618 70 19

Latest tweet @bezemergroup