Linear winch type KTC 400

Product description

KTC 400 linear winch capacity 500 mTon


This linear winch is designed and engineered by Kley France on specification of Bezemer. This machine has socket passing capabilities and is often used for pipe pull operations, however also regularly used for deepwater lowering operations.


The linear winch is capable of continuous paying out under load. The power unit has some special features to accommodate this type of operations, i.e. large hydraulic oil cooling capacity.


 


General description linear winch


The linear winch consists of two grippers mounted in a frame. The wire rope passes through each gripper. Each gripper is capable of holding the wire rope. The grippers move back and forth (extend and retract) through the actions of four hydraulic main cylinders. The grippers are independently controlled and their movement can be sequenced to either pull-in or payout the wire rope.


The holding action is developed by two wedges inside each gripper. If the wedges are contacting the wire rope when a load is applied to the wire rope, the wedges will clamp onto and hold the wire rope. When one gripper is pulling, the wire rope slips through the wedges of the other gripper.


Four hydraulic wedge cylinders control wedge movement. Extending the wedge cylinders closes the wedges. Retracting the wedge cylinders opens the wedges. Each pair of wedge cylinders is hydraulically connected in parallel to assure equal actuating forces.


Wire rope pull in is accomplished manually or automatically by the control system. In both the manual and automatic mode, the #1 and #2 gripper wedges maintain in contact with the wire rope at all times.


The linear winch consists of two grippers mounted in a frame. The wire rope passes through each gripper. Each gripper is capable of holding the wire rope. The grippers move back and forth (extend and retract) through the actions of four hydraulic main cylinders. The grippers are independently controlled and their movement can be sequenced to either pull in or payout the wire rope.


The holding action is developed by two wedges inside each gripper. If the wedges are contacting the wire rope when a load is applied to the wire rope, the wedges will clamp onto and hold the wire rope. When one gripper is pulling, the wire rope slips through the wedges of the other gripper.


Four hydraulic wedge cylinders control wedge movement. Extending the wedge cylinders closes the wedges. Retracting the wedge cylinders opens the wedges. Each pair of wedge cylinders is hydraulically connected in parallel to assure equal actuating forces.


Wire rope pull-in is accomplished manually or automatically by the control system. In both the manual and automatic mode, the #1 and #2 gripper wedges maintain contact with the wire rope at all times.


Wire rope payout can also be accomplished manually or automatically. Since the wedges holding the load can not be opened, control of the load is always maintained.

KTC 400 LINEAR WINCH_sn65.24.003_Specification_AUG.20'
Download

General Arrangement Linear Winch KTC 400
Download

KTC 400 DIESEL DRIVEN HPU_sn65.92.012_Specification_AUG.'20
Download

General Arrangement Hydraulic Power Unit KTC 400
Download

Projects where this product is used

KTC 400 spread Trukmenistan 05

KTC 400 > Turkmenistan

HO 2012-001 pic 06

KTC 400 > Saudi Arabia

Continuous linear winch KTC 400 @ Iraq - project overview

KTC 400 > Iraq

Continuous linear winch KTC 400 @ Huelva, Spain - project overview

KTC 400 > Huelva, Spain


Document downloaden

Please fill in your name and email address.

Name:
Email address:
     
  • Continuous linear winch KTC 400
  • Continuous linear winch KTC 400 @ Huelva, Spain

Technical drawing
TD KTC 400
Performance data

Maximum Pulling Capacity  500 mTon @ 1,50 m/min

Maximum Speed  5,70 m/min @ 130 mTon

Bezemer Group Holland
Bunsenstraat 49
3316 GC Dordrecht, The Netherlands
t: +31 (0) 78 618 10 00
f: +31 (0) 78 618 70 19
e: info@bezemer.com

Latest tweet @bezemergroup