Linear winch type C1100 HS

Product description

C1100 HS Linear winch capacity 500 mTon


The C1100 linear winch was designed by Amclyde/Lucker but build by Bezemer in the Netherlands, as well as the power unit. This machine is suitable for a large range of operations due to its small size which makes it easy to install it on a flattop barge to perform chain tensioning operations, pipeline pulls outs, J-tube pull-ins and salvage operations.


This unit has a twin diesel hydraulic power unit which is fully redundant, the unit can run on one (1) engine at its full capacity, but at half speed.



General description linear winch


The linear winch consists of two grippers mounted in a frame. The wire rope passes through each gripper. Each gripper is capable of holding the wire rope. The grippers move back and forth (extend and retract) through the actions of four hydraulic main cylinders. The grippers are independently controlled and their movement can be sequenced to either pull-in or payout the wire rope.


The holding action is developed by two wedges inside each gripper. If the wedges are contacting the wire rope when a load is applied to the wire rope, the wedges will clamp onto and hold the wire rope. When one gripper is pulling, the wire rope slips through the wedges of the other gripper.


Four hydraulic wedge cylinders control wedge movement. Extending the wedge cylinders closes the wedges. Retracting the wedge cylinders opens the wedges. Each pair of wedge cylinders is hydraulically connected in parallel to assure equal actuating forces.


Wire rope pull-in is accomplished manually or automatically by the control system. In both the manual and automatic mode, the #1 and #2 gripper wedges maintain in contact with the wire rope at all times.


Wire rope payout can also be accomplished manually or automatically. Since the wedges holding the load cannot be opened, control of the load is always maintained.

C1100 HS LINEAR WINCH_sn65.21.006_Specification_Aug.'20
Download

General Arrangement Linear Winch C1100 HS
Download

C1100 HS DIESEL DRIVEN HPU_sn65.92.014_Specification_Aug.'20
Download

General Arrangement Hydraulic Power Unit C1100 HS
Download

Projects where this product is used

C1100 HS Linear Winch Spread 04

C1100 HS > Brazil

HO 2010-004 pic04

C1100 HS > Lybia


Document downloaden

Please fill in your name and email address.

Name:
Email address:
     
  • Continuous linear winch C1100 @ Brazil
  • Continuous linear winch C1100 @ Brazil

Technical drawing
TD C1100 #6
Performance data

Maximum Pulling Capacity  500 mTon @ 3,00 m/min

Maximum Speed  3,50 m/min @ 260 mTon 

Bezemer Group Holland
Bunsenstraat 49
3316 GC Dordrecht, The Netherlands
t: +31 (0) 78 618 10 00
f: +31 (0) 78 618 70 19
e: info@bezemer.com

Latest tweet @bezemergroup